WHAT IS SPEAKER MONITOR

SPEAKER MONITOR

Source Speakers

Many people are familiar with the speaker, or a megaphone. But on the contrary, few people know what it is Speaker Flat? Speaker is a device that converts electrical signals to sound (audio frequency) by vibrating membrane components that are inside to vibrate the air until a wave of sound to the human ear.

What is meant by the FLAT SPEAKER are speakers that have the ability to remove all frequencies of sound recorded by the recording software, to be honest it is, without the slightest addition or subtraction frequency (uncolored or transparent). There is 2 type of speaker flat, Speaker Monitors Speaker Monitors Active and Passive. Active Monitor speakers, is a type of flat speakers which there are power amps and comprehensive facilities so it is quite easy to operate. This is different to the type of passive speakers who need a little knowledge of audio installations, such as watts, ohms, damping, overload protection, crossover, etc. so that speakers of this type is called the monitor & amp unpowered. Frequency audio voice signals are separated into several kinds of systems 1. Two-Line System, is a type of speaker simplest because it only consists of bi¬amp the Bass (Speaker woofer) and treble (Speaker Tweeter). 2. Three Line System, a system similar to the two-track system, only the central part of voice frequencies separated by Band Pass Filter. So it can be set by function: Woofer, Mid Range and Tweeter 3. System Four Avenues, in this system, the frequency range is wide benar¬benar separated, below 100Hz (super bass), 100Hz to 500Hz (bass middle), 500Hz to 5KHz (middle), and above 5KHz (high or tweeter).

KNOWN IN A SYSTEM CHANNEL SPEAKER CROSSOVER

Frequency audio voice signals are separated into several kinds of systems

1. Two-Line System, is a type of speaker simplest because it only consists of bi¬amp the Bass (Speaker woofer) and treble (Speaker Tweeter).
2. Three Line System, a system similar to the two-track system, only the central part of voice frequencies separated by Band Pass Filter. So it can be set by function: Woofer, Mid Range and Tweeter
3. System Four Avenues, in this system, the frequency range is wide benar¬benar separated, below 100Hz (super bass), 100Hz to 500Hz (bass middle), 500Hz to 5KHz (middle), and above 5 KHz (high or tweeter).

THE ADVANTAGE OF FLAT SPEAKER :

1. These speakers are able to minimize the emphasis or deemphasis (pressure) which means there is no shift of phase shift of a particular frequency.
2. Reproduce accurate sound tone quality of the original audio source
3. Able to respond to the frequency in a wide frequency range, so that different types of instruments that are recorded can be clearly heard.

THE RIGHT FLAT SPEAKER PLACEMENT

Unlike laying speakers in general, laying flat speakers have specific rules as it aims to hear the sound more accurate and precise.

Known as the Triangle Rules, among others:

1. Flat speaker or Near Field Monitor should be placed parallel, the same height as the position of the ear of an engineer. If the placement of flat speakers are too high cause low freq dominant, whereas too below will apply instead, which is the dominant high freq.
2. Using the techniques of the equilateral triangle, the two speakers should be the same position and the distance between the speaker and the ears should be parallel (equilateral triangle)
3. Mounting the speakers in a standing position, with high speakers at the top and at the bottom of the low speaker.

Well, it's a bit of discussion we know more in a flat speaker, not too heavy and not too light, at least can add insight pal of music lovers in developing knowledge and ability.

#SpeakerMonitor
#Russell
#SpeakerKnowledge

russell SPeaker Monitor

nvaproject.info@gmail.com